Things to Consider Before Installing Walk-in Tubs
When installing a walk-in tub in your home, you must consider the electrical requirements. You’ll need a dedicated circuit with a 15 amp capacity and GFCI grounding. Also, you’ll need to prepare the area.
A professional will take care of these issues for you. By hiring Mr. Rooter Plumbing of Fort Worth, you can ensure that your plumbing needs will be expertly handled by experienced and reliable professionals, who use the latest technology, provide respectful service, and guarantee their work, all while delivering fair pricing and outstanding customer service.
Preparing the area
Preparing the area before installing a walk-in tub is an essential part of the installation process. This will involve cleaning the site entirely and disconnecting any electrical cords. Next, it is necessary to remove the old bathtub. This step can be difficult for those who are inexperienced. If the tub is ancient, you should separate it into pieces before emptying it. Once you have taken apart the old tub, make sure you clean the area well. The next step is to prepare the area before installing the walk-in tub faucet. This job is easier to complete if you have some mechanical skills. The installation will take about one day. It is crucial to level the walk in tubs in Kansas City before installing the faucet. Make sure you use a standard level to check the status. If you are not a plumber, consider hiring a professional to install the faucet.
Handrails
A walk-in tub is an adaptation of a standard bathtub that allows someone with limited mobility to bathe safely and efficiently. They come equipped with seating and handrails to ensure that bathers do not slip while entering and exiting the tub. In addition, they usually feature a low step for entry and an integrated shower enclosure that eliminates the need to raise one’s leg over a high bathtub ledge. The shower area is generally equipped with an ergonomic seat and a handrail, and some models feature a built-in shower. Handrails are essential when installing a walk-in tub, but the number and types of handrails can vary greatly. It is best to consult with your bathroom remodeling contractor to see how many handrails are needed and where they will be placed. Ensure that there is enough space to install handrails and that the handrails are installed in an ergonomically-sound manner. You should also ensure that the bath controls are within reach.
Size
When considering a walk-in bathtub, it is essential to check its size before buying. They can either be smaller or larger than your existing bathtub or shower. The height of walk-in tubs is typically about 40 inches, but there are different sizes to fit your bathroom. This extra height allows you to get fully submerged in the water. Standard walk-in tubs measure thirty to thirty-two inches wide. Smaller models can be as small as twenty or thirty inches in width. Larger walk-in tubs can be forty or fifty inches tall. They can hold up to 100 gallons of water.
Cost
Installing a walk-in tub can be an expensive undertaking. Depending on size and materials, the tub can cost anywhere from seven hundred to three thousand dollars. Some walk-in tubs may need new plumbing, which can add several thousand dollars to the overall project. Another consideration is the type of tub you choose. Some walk-in tubs have water jets that need an electric motor. Most electricians will charge between forty and one hundred twenty dollars an hour to install the engine and connect it to the tub.
Installation
Before installing a walk-in tub, you’ll need to make sure you’ve measured your bathroom correctly. In addition, you should check to see if you need to upgrade the plumbing. If so, you’ll want to contact a contractor before installing the tub. In many cases, the installation will take only a couple of days. However, it will take longer if you need to make significant alterations to your bathroom. It would be best if you shopped around for the best price before you make your final decision. You should get several quotes from multiple suppliers and make sure you get references. Some suppliers don’t offer installation services, so you may need a bathroom renovator or contractor to do it for you. Make sure you find the best price and installer and look for hidden costs.
